Three different questions
Whether you can simply build a farm fence in NSW depends on three separate questions: does the fence need planning approval, can the vegetation in its path be cleared, and does the contractor need a licence for the work. Different agencies answer each one under different laws, and a yes to one tells you nothing about the others.
1. Planning approval
NSW planning guidance says fences can be built without planning approval in many circumstances, as exempt development (NSW Planning). In rural zones, environmental zones and large lot residential areas, the conditions it lists include:
- a height of no more than 1.8 m,
- post and wire or post and rail construction,
- masonry only near a driveway entrance,
- any electric fence meeting the relevant Australian and New Zealand standard.
The exemption does not apply to heritage items, heritage conservation areas or some sensitive land. A fence outside the conditions needs a development application. The guidance does not mention farm fences by name, so if you are unsure, ask the council that covers the land: Tamworth Regional, Gunnedah, Liverpool Plains or Walcha.
| Fence | Likely position | Check with |
|---|---|---|
| Post and wire cattle fence under 1.8 m in a rural zone | Often exempt development | Council, if heritage or sensitive land is involved |
| Dog or deer fence over 1.8 m | Outside the exempt height | Council, before buying materials |
| Solid or masonry frontage fence | Outside the exempt type, except near entrances | Council |
| Fence on a heritage-listed property | Not exempt | Council |
| Fence in a road reserve or across a Crown road | Needs permission first | Council or Crown Lands |
2. Clearing native vegetation
Clearing is a separate system. NSW rules for rural land allow some native vegetation to be cleared without approval for rural infrastructure, and fences are on that list (NSW Government). The allowance is the minimum needed, up to a maximum width that depends on the zone the land is in, with tighter limits for small holdings, short-term fences and vulnerable or sensitive land.
Three things catch people out:
- the maximum width counts clearing on both sides of the fence, including what the neighbour has cleared,
- the zone for a property is shown on a government map, not listed by town, so this site gives no width for any locality,
- paddock trees, creek lines and mapped sensitive areas can carry stricter rules.
Ask Local Land Services about clearing on rural land before booking a dozer. Over-clearing is an offence and cannot be undone.

3. Electric fences
Electric fence energisers are covered by Australian and New Zealand standards, and the planning guidance makes compliance a condition of exempt development. The standards have been revised over time, and a New Zealand regulator describes a newer energiser standard replacing an older one (a New Zealand regulator, secondary source). We did not read the standards and cannot say which edition NSW authorities apply. Ask the contractor which standard their installation meets and how warning signs are handled. See electric fencing.
Licensing is a fourth conversation
Nothing in the planning or clearing rules says whether the person building the fence needs a contractor licence. On that, the only NSW Government page we found speaks about fences on residential property boundary lines and does not mention farms. This site does not say either way. The contractor guide lists what to ask.
Fire season
Burning cleared timber, welding and grinding on a fence line all bring in fire rules. The NSW Rural Fire Service says fire permits are free, need to be arranged in advance, and are needed for burning during the Bush Fire Danger Period, which generally runs from 1 October to 31 March but varies (NSW Rural Fire Service). Check current fire danger ratings for your district before any hot work.
A sensible order
Ring the council and describe the fence. Ask Local Land Services about clearing. If it is a boundary, talk to the neighbour using the dividing fences guide. Then get it quoted through the contact page, and tell the contractor what you were told.
What this guide cannot confirm
It cannot tell you that your fence is exempt development, how wide you may clear on your land or which electric fence standard applies today. Planning controls vary by council and zone, clearing limits depend on maps we cannot read for you, and standards are revised. Treat this page as a list of questions. The council, Local Land Services and the contractor supply the answers.
Check the current rules before you rely on this
This page describes when a rural fence in NSW can be exempt development, the allowance for clearing native vegetation for a fence and the electric fence condition. It describes the rules in general terms as they stood in November 2026. Standards, forms, thresholds and fines change.
The authoritative sources are NSW Planning, fences (exempt and complying development), NSW Government, native vegetation allowable activities (rural infrastructure, fences), New Zealand building authority, AS/NZS 60335.2.76:2019 electric fence energisers (secondary; New Zealand; status in NSW not confirmed), NSW Rural Fire Service, fire permits information for rural landholders and farmers (PDF) and NSW Government, fencing work (licences and credentials; speaks about fencing on residential property boundary lines). Where anything here differs from those sources, they are right and we are not.
We are not fencing contractors, builders, regulators or lawyers. For what applies to your fence, ask the council that covers the land about planning, Local Land Services about clearing, and the contractor which licence or registration and which electric fence standard apply, then ask NSW Fair Trading or Building Commission NSW if you are unsure.
Accurate at the time of writing, November 2026. Always check the source before relying on it.